Brother MFC 7360N is a monochrome printer that can print, copy, scan, and fax. It comes with an LCD panel, 35-sheet Auto Document Feeder (ADF), a built-in Ethernet network interface, and a 250-sheet paper capacity tray. Carry out these below-mentioned steps brother MFC 7360N setup.
Unpack the printer and take out the printer supplies such as installation disc, setup guide, drum unit and toner cartridge assembly, and power cord.
Remove the protective tapes and covers from the printer.
Open the ink access door and take out the drum unit & toner cartridge assembly from the printer.
Gently shake the drum unit and toner cartridge assembly to distribute the ink inside the cartridge evenly.
Refix the toner cartridge into the printer and pull out the paper cassette.
Load some plain paper into the paper cassette and place it back into the printer.
Connect the printer to a wall outlet using the printer’s power cord.
Press the Power button on the printer to turn it on.
Configure the basic printer settings using the printer’s control panel.
If you wish to use the fax function, connect the telephone line cord and configure the fax settings.
Install the printer driver with the help of the installation disc that comes along with the printer.
After installing the printer driver on your computer, verify the printer functions.
No comments:
Post a Comment