Whenever there is an issue or error message on your printer, here is the troubleshoot it. Epson Et 2550 troubleshooting methods includes identifying the actual cause for the problem and taking the exact steps to solve the problem and make the printer function normally. Usually, in the Epson ET-2550 printer, issues could occur in setup, network, copying, printing, scanning, paper-related issues, etc. Some general steps to avoid the issues would be proper usage of the printer, periodic printer software update, using the recommended paper for your printer carefully to avoid paper jam, and refilling ink when the ink fill message appears on the printer.
Check whether the Wi-Fi router is turned on and connected to a working modem.
Place your printer near or within the network range of the wireless router.
If your wireless router operates on the 5 GHz frequency band, then change its settings to 2.4 GHz mode or Dual-band mode.
Connect a computer or any other wireless device to your router over Wi-Fi and check whether it is working.
If you use the WPS method to connect your printer to the router, then make sure you choose the WPS connection option on your printer’s control panel immediately after pressing the WPS button on the router. Do not take more than 2 minutes to select the WPS option in the printer.
Check your router’s configuration for any active firewall or MAC filtering. If there is an active firewall that denies the wireless connection between the printer and the router, then disable it. Similarly, if the router uses MAC filtering, then add the printers MAC address to the list to allow the connection to be established between them.
No comments:
Post a Comment