First-Time Printer Setup Guidance
Step 1: Unpacking HP 4500 Printer from the Box
- The first thing to do after getting the HP Envy 4500 printer setup is to unpack the printer box. Tear off the packing tapes on the printer box and open it.
- Remove the contents of the printer box. The contents of the box include a printer body, ink cartridges, user manual, power cord, installer CD, printer parts, etc.
- Remove all the packing materials and packing tapes on the printer. Check the sides and rear of the printer for packing tapes and remove if you find any.
- Open the printer’s access door and remove the packing tapes from the printer’s interior. Peel off all the tapes on the scanner glass and the paper tray of the 123.hp.com/envy4500 printer.
Step 2: Setting The Preferences
- Connect one end of the power cord directly to the wall outlet and the other end to the printer’s rear. Do not connect it to a power surge or an electrical surge.
- Switch on the HP Envy 4500 setup printer and wait for it to settle down. Set the desired preference such as language, region, date and time, etc.
Step 3: Loading Paper in HP Envy 4500
- Pull the paper tray out and move the paper width guides. Load a stack of paper and close the paper width guides in such a way that it brushes the edges of the paper.
- Open the ink cartridge access door and wait for the carriage to move to the center. Take the new ink cartridge out from the package.
- Remove all the packing tapes on it. Hold the ink cartridge by its sides and install it into the correct slot. Push until it fits. Close the access door.
Step 5: Aligning The Ink Cartridges
- Open the scanner lid and place a plain white paper and use HP Envy 4500 scan software. Position it according to the engraved guides. Tap on the Ok button to align the ink cartridges.
- To connect your printer to your computer, you need to install the printer driver on your computer. You can download it from our website or use the installer CD, Read More...
No comments:
Post a Comment