HP Laserjet Pro MFP M29w Installation | 123.hp.com/ljprom29w

How to Setup HP Laserjet Pro MFP M29w Printer?

Quick Steps for First-Time Setup:

1. Tear the tape on top of the box to open it.
2. Take the printer out of the box and discard all packing materials surrounding it.
3. Take the toner cartridge and remove the clips from it.
4. Handle both sides of the toner cartridge and gently shake them.
5. Drag the orange tab to tear the sealing tape from the toner cartridge.
6. Align the toner cartridges along the tracks inside the printer.
7. Push the toner cartridge until it fixes into place. Close the ink cartridge access door.
8. Drag the output tray, input tray, and their extensions. Mount stack of paper into the input tray.
9. Adjust the paper width guides against the edges of the paper.
10. Insert one end of the power cable to the printer’s rear and another end to the wall socket.
11. Switch on the printer. Install the driver on your system and your printer is now set.

HP Laserjet Pro MFP M29w Wireless Setup

Windows:

• Obtain the network name and password before configuring the printer to a wireless network.
• Turn on the printer, system and the router.
• Connect the system to a wireless network with stable internet access.
• Keep the printer and the system close to the wireless router for better signal strength.
• Connect the Laserjet Pro m29w printer and the system to the same wireless network.
• Use the Wi-Fi Protected Setup process to connect the printer to the wireless network.
• If the router is compatible with the WPS method, long-press the Wireless button on the printer’s control panel for at least three seconds.
• Wait till the Wireless light and Ready light starts to blink. Press the WPS button on your router.
• Wait for at least two minutes for the printer to establish the network connection.

Mac:

• You need a network name and password for connecting the printer to a wireless network.
• Switch on the printer, system, and router.
• Connect the system to a wireless network with an active Internet.
• Connect the system and printer to the same wireless network.
• Move the printer and system to the wireless network for strong signal strength.
• Disconnect the USB cable from the printer’s rear if the system prompts.
• Follow the Wi-Fi Protected Setup method for connecting the printer to the wireless network.
• Check if the printer supports WPS, if so, press and hold the HP Laserjet Pro MFP M29w Wireless Setup button.
• Wait for the wireless light and ready light to flicker.
• Press the PUSH button to establish the network connection.
• Wait for at least two minutes when the printer establishes the network connection.