How to Replace the Toner Cartridges for HP Laserjet MFP M527DN?

HP M527DN Toner cartridges require replacement when they are out of or have very low ink. Ensuring that your toner cartridge has enough ink allows you to print documents that meet the laserjet m527dn printer’s standard quality output. The printer will inform you when the toner cartridge is low or very low. The actual toner cartridge level might vary. Ensure that you have a replacement cartridge available to install when print quality is unsatisfactory. Continue using the current cartridge until redistributing the toner no longer yields satisfactory print quality. To redistribute the toner, take the toner out of the printer and gently rock the cartridge back and forth by its horizontal axis. Follow the instruction below to replace the HP M527DN Toner cartridge.

1. Push the top-cover release button on the left side of the printer. Draw open the front door. Grab the handle of the used toner cartridge and pull it to take it out of the printer.
2. Unpack the new cartridge by peeling off the plastic strip and opening the package. Make use of the packaging material to recycle the old toner cartridge.
3. Grab both the ends of the toner cartridge and shake it gently 5-6 times. This will ensure that the ink in the cartridge is spread evenly.
4. Align the toner cartridge with its slot, and then place the toner cartridge into the printer.
5. Shut the front door. Keep the old HP Laserjet Ent MFP M527dn Printer Toner cartridge into the package that the new cartridge was delivered in.

How to Set Up Faxing on HP Laserjet MFP M527DN?

1. Insert the document print side down on the scanner glass, or place it print side up in the document feeder and alter the paper guides to fit the size of the document.
2. From the Home Screen on the printer control panel, choose the Fax button. Choose the recipients manually or from the contacts list.
3. To configure settings for the document, choose the More options button. For example: Choose Resolution to specify the resolution for fax. If the original document is printed on both sides, choose Original Sides, and then select 2 sided.
4. Choose the preview button to preview the document. Once the document is ready, tap the start button to send the fax.
5. Place the document print side down on the scanner glass, or place it print side up in the document feeder and adjust the paper guides to fit the dimensions of the document. From the home screen on the laserjet m527dn printer’s control panel, choose Fax. You might be required to type a user name and password.
6. Choose the recipients manually or from your contacts list. To load a Quick Set (pre-defined setting), choose a Quick Set and then choose Load under the Quick Sets list and it got best HP Laserjet Enterprise MFP M527DN Printer.
7. To alter settings such as Resolution, Sides and Content Orientation, choose Options in the lower left corner, and then choose the settings from the options menus. Choose Done, if prompted.
8. Go through the preview using the expand or collapse button in the left of the preview pane. Use the buttons on the right of the screen to adjust the preview options and to rearrange, rotate, insert, or remove pages. When the document is agreeable, choose to Send to send the fax.

How to Fix Low Cartridge Issue on HP Laserjet Pro MFP M29w Printer?

• When the cartridge level is low, it is necessary to redistribute the toner cartridges. The cartridge life may vary based on the HP Laserjet Pro MFP M29w printer model.
• Take the existing toner cartridge out of the printer and shake them on the horizontal axis for equal distribution of the cartridge and try to print.
• Re-install the toner cartridge into the printer and close the cover. If the cartridge level is very low, the replacement of the cartridge is necessary for high-quality printing.
• Change the Very Low settings on the printer if the cartridge supplies reach the low state. Open the Embedded Web Server. For a Direct-connected printer, open the HP Printer Assistant software.
• If you have a Windows 10 OS, click the Start menu. Select the All Apps icon. Choose the printer name. If it is Windows 8.1, navigate to the Start screen. Choose the printer name.
• Windows 8 OS: Go to the Start screen. Select the All Apps option on the app bar and choose the printer name from the list.
• Windows 7 OS: Select the Start option from the system desktop. Click the All Programs option, Choose the folder name of the printer and choose the printer name.
• Click the Print option in the HP Printer Assistant and choose the HP Device Toolbox option. For a network connected printer, type the IP address on the browser page. Open the EWS page.
• Select the System option and click the Supply Settings option. Choose any one of your choices from the Very Low Setting on a drop-down menu.
• Click the Stop option to set the printer to stop printing till the toner cartridge replacement gets over. Click the Continue option to set the HP Laserjet Pro MFP M29w printer to alert that cartridge is very low, but proceed to print.

Why does HP Laserjet Pro M426FDN keep telling to Load Paper?

• Open the HP Laserjet Pro MFP M426FDN Printer and take out any jammed sheets of paper. Make sure no torn remnants of the paper are lodged inside the printer.
• Place the tray with the correct size of paper for the job. Ensure the paper size and type are assigned correctly on the HP Laserjet Pro M426fdn printer control panel.
• Ensure sure that the paper guides in the tray are positioned correctly for the dimensions of the paper. Modify the guides to the appropriate indentation in the tray. The arrow symbol on the tray guide should line up perfectly with the marking on the tray.
• Ensure that the humidity level in the room is within the recommended specifications for the printer.
• Examine the HP M426fdn Multifunction Laser printer control panel display to view if it is showing a prompt to feed the paper manually. Load paper and proceed.
• The rollers above the tray can also be contaminated. Clean the roller with a lint-free cloth dampened with warm water. Utilize distilled water, if it is present.
• If the tray rollers are worn, the paper may not be picked perfectly. Inspect the rollers for any smooth surface either completely around the circumference or just one side.
• In case there are any smooth areas, examine the Supplies Status page to view if the Fuser (Maintenance Kit) is low and needs to be replaced these rollers come with the kit.
• If the printer picks multiple sheets of paper, take the stack of paper out of the tray and flex it, rotate it 180 degrees, and flip it over. Do not fan the paper. Return the stack of paper to the tray.
• Utilize paper that meets HP Specification for the HP Laserjet Pro MFP M426FDN Setup. Do not use wrinkled, folded or damaged. If required, utilize paper from a different package. Ensure that the tray is not overfilled with paper beyond the stack-height marking inside the tray.

How to Unbox and Setup the HP Officejet Pro 9020 Printer?

1. Remove the HP Officejet pro 9020 printer from the box.
2. Lift the scanner lid of HP Officejet 9020, remove the packing materials from the scanner lid, and then close the lid.
3. Also, remove the packing materials from the exterior part.
4. Now, plug the power cord to the rear of the printer and the electrical outlet.
5. When the HP 9020 doesn’t turn on immediately, press the Power button on the printer.
6. After turning on the HP 9020 printer, set the preferences on its control panel.
7. Choose your preferred country, language, and then click the Confirm option.
8. Open the front door of the HP Officejet Pro 9020 printer.
9. Now, open the ink cartridge access door of HP Officejet Pro 9020 Printer Setup. Wait until the carriage stops moving.
10. Take the new ink cartridges from the box and insert it into their slots.
11. Always hold the black plastics of the ink cartridges and insert them.
12. Now, close the cartridge door and then the printer door.
13. On the HP Officejet Pro 9020 printer’s control panel, click OK.
14. Now pull the input tray out and load plain papers in it.
15. Adjust the paper guides until the edges of the paper rest on it properly.
16. Insert the input tray back into your printer.
17. On your HP Officejet Pro 9020 Setup’s control panel, click the OK option.
18. When prompted to align the printhead, click the OK option.
19. Open the scanner lid. Place the scannable paper with the face down on the engraved glass.
20. Close the scanner lid now and then click the Scan option. The printer is all set to use now.

How to Connect HP Officejet Pro 9015 to Wireless Network?

To set up HP Officejet Pro 9015 on a wireless network, first, it should support the connectivity. You need a router that is set between 2.4 to 5 GHz frequency range, a computer connected to the router through the wireless mode, and a stable internet connection like DSL broadband. The following how to Setup HP Officejet Pro 9015 Printer instructions provide you the wireless setup procedure.

• Check whether you have plugged in a USB cable to connect your printer and computer.
• Keep the network name (SSID) and password ready.
• From the printer’s control panel, tap Settings, Network Settings and then press the Wireless Setup Wizard.
• If you have the Wireless icon on your printer, tap it and it automatically activates the wireless function on your printer.
• Now, download the latest version of the full-feature driver for your printer from our website.
• During installation when the installer prompts you to select the network connection method, choose Wireless and click on Next.
• Based on the rest of the instructions that display on the installer window, complete the driver installed successfully.
• To confirm that the printer has been established on the wireless network, give a test print from your computer.

How do I Print Double Sided on HP Officejet Pro 9010?

• Make sure that the HP Officejet 9010 printer is turned On. Confirm that the Officejet Pro 9010 printer is linked to the Windows system.
• Click the Windows logo on the Personal Computer. Tap the File Explorer window and then select the document that needs to be printed.
• Open the Print tab by selecting the Share option. Tap the Printers drop-down list box and then choose your HP Officejet Pro 9010 printer.
• Mention the number of pages to be printed and specify the print settings, and then choose the Print button.
• Open the Finder dialog box on your Mac Personal Computer. The Finder pop-up window opens on the screen.
• Navigate to your file and select it so that it appears on your computer.
• Click the File menu, tap the Print button and then choose the Officejet Pro 9010 printer.
• Modify the required settings and start printing by selecting the Print button.
• Insert the appropriate paper into the input tray. Place the black and tri-colored cartridges in the slots.
• Click the Start menu and tap the Control Panel button.
• Choose the Printers & Faxes option and select your HP Officejet Pro 9010 Printer Setup.
• Click Printing Preferences and select the Finishing tab, and then touch the Print On Both Sides button.
• Tap OK and select Print. Now take the printed pages out of the output tray and load them into the main input tray.
• Print the other sides by tapping the Continue button.
• Open the document and click File, and then select Print. If needed, tap the Show Details button.
• Look for the Two-sided option on the Print dialog box.
• If the Two-sided button is available, it indicates that the Officejet Pro 9010 printer supports automatic duplexing.
• Select either the Short Edge Binding or Long Edge Binding option by ticking the checkbox.
• Click Print and wait until your Officejet Pro 9010 printer finishes the printing process.